Vacuum Compression Molding Press
High-precision High-Speed double-oil pump full-automatic vacuum molding machine, and two axes can be operated at the same time;
The vacuum machine system adopts Japan’s Mitsubishi PLC plus man-machine control system and single-chip control system, with clean lines, low failure rate, good safety performance and long service life.
2RT/3RT/4RT molding machine can supply,The machine vacuum pump adopts German BUSCH, which has the advantages of good performance, low noise, easy operation, long life and fast speed.The vacuum chamber can reach 650-700mmHg in 5 seconds.
Introduction:Suit for Auto parts, rubber compression, medical rubber, O-rings, silicone keys, civilian rubber, bottle stoppers, industrial rubber, silicon/rubber and other multilayer molded products.
Model | 100T | 150T | 200T | 250T | 300T | 400T | 500T | |
Output(Ton) | 100 | 150 | 200 | 250 | 300 | 400 | 500 | |
Stroke)MM | 220 | 250 | 250 | 250 | 300 | 300 | 300 | |
Table(MM) | UP | 400*400 | 410*410 | 510*510 | 600*550 | 600*600 | 750*750 | 800*800 |
DOWN | 400*400 | 460*460 | 550*560 | 650*600 | 650*650 | 800*800 | 850*850 | |
Cylinder bore(MM) | 255 | 310 | 356 | 400 | 450 | 500 | 560 | |
Horsepower(HP) | 5.5*2 | 5.5*2 | 7.5*2 | 7.5*2 | 7.5*2 | 10*2 | 10*2 | |
Mould opening | Upper opening and lower-falling-Mould in and out 2RT/3RT/4RT | |||||||
Double-axis ele heating(Kw) | 14 | 18 | 25 | 30 | 32 | 50.8 | 69.2 | |
Vacuum (kw) | 2.2 | 2.2 | 2.2 | 2.2 | 2.2 | 4 | 4 | |
Total electricity(Kw) | 27.4 | 31.2 | 43.2 | 49 | 51 | 77.2 | 95.2 | |
Weight(KG) | 6000 | 7500 | 8500 | 10500 | 13000 | 19500 | 24000 | |
Machine size(MM) | 2475*1780*1550 | 2840*2100*1800 | 2850*2230*1900 | 3350*2550*2100 | 3400*2550*2150 | 3650*2800*2400 | 4000*3000*2875 |
Machine Features
Adopt dual power independent oil circuit design, stable, quiet, low failure rate, two axes can be operated at the same time, energy saving 50%;
· The front top mold is suitable for various two-layer or multi-layer molds. It is a new type of multifunctional model;
· Adjustable lifting and closing speed, accurate and reliable;
· Accurate positioning of entering and exiting molds, 100% positioning safety, to ensure that the molds are not damaged;
The vacuum chamber can reach 650-700mmHg within 5 seconds;
· With fast and slow calibration mode selection function, the normal calibration of the mold is more accurate and safer.